Brightness & color temperature

Adjust the FanLamp Pro lamp brightness and switch between warm, neutral and cool white.

Once a fan is paired, the Light tab shows two main controls:

Brightness slider — drag to dim from 1 % to 100 %.
Color temperature — three or four taps depending on the fixture (warm white, neutral, cool white, and on RGB-capable fixtures a color picker for the accent ring).

The app exposes finer brightness steps than the included physical remote, which is one of the main reasons owners install it.

RGB scenes and music sync are only available on fixtures whose hardware includes the accent ring. Plain 3-CCT fixtures will only show the white presets.

Tips

The last brightness you set is remembered across power cycles for each device.
If your slider goes to 100 % but the light barely dims, your fixture may be wired to a wall dimmer instead of a regular switch. Replace the dimmer with a standard on/off switch — see the OEM manual.

Once a fan is paired, the Light tab shows two main controls:

Brightness slider — drag to dim from 1 % to 100 %.
Color temperature — three or four taps depending on the fixture (warm white, neutral, cool white, and on RGB-capable fixtures a color picker for the accent ring).

The app exposes finer brightness steps than the included physical remote, which is one of the main reasons owners install it.

RGB scenes and music sync are only available on fixtures whose hardware includes the accent ring. Plain 3-CCT fixtures will only show the white presets.

Tips

The last brightness you set is remembered across power cycles for each device.
If your slider goes to 100 % but the light barely dims, your fixture may be wired to a wall dimmer instead of a regular switch. Replace the dimmer with a standard on/off switch — see the OEM manual.

Tips

Spis treści

Brightness & color temperature

Tips

Spis treści