Ceiling fan installation | FanLamp Pro App — Bluetooth シーリングファンライトのペアリング・操作・トラブル解決

⚠ Electrical work. If you are not comfortable working with mains voltage, hire a licensed electrician. The OEM manual that shipped with your fan is the authoritative source.

The compatible OEM ceiling fan light fixtures (Kviflon, Surtime, Sunvie, ANTOINE, Home Depot store brands) share a common install pattern:

Shut off power at the breaker and confirm with a voltage tester.
Attach the hanger bracket to the outlet box.
Pass the downrod and wires through the canopy, then seat the downrod/hanger-ball assembly on the bracket.
Wire: green to ground, black supply to AC IN L, white supply to AC IN N, and connect motor leads via the supplied connectors. Incorrect wire connection will damage the receiver.
Mount the canopy and tighten the thumb screws.
Restore power and pair with the FanLamp Pro app (see § Pairing).

Maintain at least 10 ft (3 m) of blade clearance from the floor. Do not use a variable-rheostat or dimmer wall switch — the compatible receivers are designed for a plain on/off switch.

⚠ Electrical work. If you are not comfortable working with mains voltage, hire a licensed electrician. The OEM manual that shipped with your fan is the authoritative source.

The compatible OEM ceiling fan light fixtures (Kviflon, Surtime, Sunvie, ANTOINE, Home Depot store brands) share a common install pattern:

Shut off power at the breaker and confirm with a voltage tester.
Attach the hanger bracket to the outlet box.
Pass the downrod and wires through the canopy, then seat the downrod/hanger-ball assembly on the bracket.
Wire: green to ground, black supply to AC IN L, white supply to AC IN N, and connect motor leads via the supplied connectors. Incorrect wire connection will damage the receiver.
Mount the canopy and tighten the thumb screws.
Restore power and pair with the FanLamp Pro app (see § Pairing).

Maintain at least 10 ft (3 m) of blade clearance from the floor. Do not use a variable-rheostat or dimmer wall switch — the compatible receivers are designed for a plain on/off switch.